Camaro
Our SureFit kits are designed to place the evaporator case and air duct hoses behind the dash for a clean factory-air look. In most cases, the SureFit system will be controlled by your original OEM dash controls using our patented “Electronic Cable Converters.” In some applications, a new factory-look control panel is included with the kit. Some early car kits must use additional switches. All SureFit systems provide full OEM-style operations, including air conditioning, floor or vent exit heating, and a powerful dehumidified defroster. To retain a true factory look, the A/C air exits through the factory dash louvers, when originally equipped in your car’s dash.
The under-hood components are designed to mount to stock engine bolt points (although we can accommodate many custom engine swaps). In most cases, the condenser assembly mounts to the stock core support. Again, because of production design changes, you may need to modify some mounting points slightly. Each SureFit kit features many components designed by our engineers specifically for each make and model application. Components such as pre-formed aluminum lines, condenser mounted drier, engine compressor mount brackets, and a replacement glove box insert give these systems a clean, finished-looking installation. The best news is, because our entire SureFit evaporator/heater case is mounted inside the car behind the dash, the firewall/engine area of your car is cleared of those big, ugly factory A/C housings! Each SureFit kit contains a factory-looking, vehicle-specific firewall cover panel to seal off the opening left from the removal of the OEM system and provide refrigerant line and heater hose routing. SureFits also allow for a smoothed or filled firewall.
The Vintage Air SureFit kits are the best value and the most completely engineered air conditioning systems you can install in your classic car. Add the fact that Vintage Air has remained the most respected name in performance aftermarket climate control systems for almost fifty years, and the choice is obvious! If you’re planning to air condition one of the popular American classic cars, one of our bolt-in, complete SureFit kits is the simple and easy solution.**
Sure Fit™ System Features:
- Evaporator assembly mounts behind the dash
- Our largest Magnum evaporator design
- Separate high-capacity aluminum plate & fin cooling coil
- Separate parallel flow heater coil
- High volume OEM quality dehumidified defroster mode
- Enlarged blower fan and motor package (Gen 5 Super)
- Fly-by-wire electronic servo motor controls - no cables or capillary tube to route
- Uses your vehicle’s factory control panel adapted by our patented “Electronic Cable Converters”
- Some applications include an all-new OEM-look electronic replacement control panel
- Some applications on non-factory air cars will include new under-dash louver pods
- Under-hood components such as compressor, engine mount brackets, condenser, drier, model-specific refrigerant lines, and complete wiring harness
- Alternate engine brackets available for engine swaps
- Flat or stamped OEM look steel firewall cover panel
- Replacement molded glove box (reduced capacity)
- Award-winning installation manual and a full technical team ready to help you if needed