null Skip to main content
1957 Chevrolet Full-Size Gen 5 SureFit™ Evaporator Kit with 4-Vent Plenum and Deluxe Control Panel

1957 Chevrolet Full-Size Gen 5 SureFit™ Evaporator Kit with 4-Vent Plenum and Deluxe Control Panel

$1,815.00
Write a Review
SKU:
561557
Application Summary
NOTES:
1. This kit requires an OEM, deluxe 4-lever control panel (Not included).
2. This kit is designed for the original firewall and dash.
3. Refrigerant lines are routed through the core support, and the drier mounts behind. These kits may be upgraded to include our popular polished ProLine compressor/alternator bracket.
4. If using a cross flow radiator, see Condenser Kit # 03455-VCC.
5. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.
6. When retaining the original 265 or 283 V8 engine, it may be necessary to upgrade the harmonic balancer and pulleys. You will also need to upgrade from the generator to an alternator.
7. SureFit™ systems may interfere with some OEM radios or in-dash speakers.
Application Note
With no molded center vent, this kit allows the use of 4 individual louver locations.
Regulatory:
WARNING: California proposition 65
Instructions:
Installation Instructions
Adding to cart… The item has been added

Vintage Air' 5th generation SureFit climate control systems are the most powerful and technologically advanced systems available today. They employ an exclusive, fully electronic microprocessor-controlled system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash.

Additional features include variable blower speed and dash/floor/defrost blend.

**Evaporator kit includes the evaporator unit and mounting brackets, louvers (where required), duct hose, wiring harness, our patented Electronic Cable Converters, hardware and installation instructions.

  • Engineered to cool your vehicle faster than ever
  • Improved diagnostics and advanced systematic fail safes
  • Multiple mounting options for an easier installation
  • Rubber well-nut mounting points for improved NVH isolation
  • Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment
  • OEM block-type expansion valve
  • Injection molded case for optimal precision, strength and quality
  • Injection molded blend air doors with integral rubber seals
  • Removable access covers for coil service
  • Interchangeable defrost and floor heat plenums for increased mounting flexibility
  • Powder coated steel mounting brackets
  • Quiet high-performance blower
  • Includes new bolt-in electronic control panel
  • Flat steel firewall cover